I cut and welded underwater for over 20 years. I know a little bit. Never use AC AROUND WATER ,we used 400 amp dc for cutting . Use good rubber gloves, sea water in a much better conductor that fresh water. Now days they have thermic cutting rods and you can cut steel with 12 volts , you still need a high flow oxy regulator. And I still have my silver fillings, even tho it felt like I i had a mouth ful of aluminum foil at times. I once hit my diving partners.helmet with 300en or 400 amp cuttung rod, it knocked him out , he had burns on his c heeks , it arched from his air intake and out his exhaust chin buttion. He had a headache for a few days. He got even with me ,but thats another story. Jack

The cleverness of your hidden "subscribe" messages never cease to impress me.

You have better tools than the shop I cut my teeth in lol, I would have marked 4 points and used a height gauge to index it in a vice . Its amazing what you can make with almost nothing lol . Good job looks pretty good .

I want one , that's super sweet.

Isn't 0.1" a tenth of an inch not a thousandth (0.001")?

Every video you make...🤌🤌🤌🤌

Use your hinky mini lath to make a micro lathe. I have a midi lath that works just fine. It's a wood lath though I've made tin candles bases for old timey candle holders.

Now you only need to acquire a tungsten rod to start making APFSDS rounds for tank cannon and selling them to shady countries.

Anyone notice the Big Bolt with Rolled Threads used as a prop to talk about cutting threads?

Just to be picky, the water doesn't boil. Usually it boils at the very end when the lower chamber is almost empty and the pressure drops. At that point you can clearly hear the gurgling noise and it's time to turn off the gas (a bit earlier than that is not bad, I'd say). EDIT: I forgot, you'll want to keep the fire low or you'll burn the coffee!!!

Never fails to amuse me listening to Alan Alda explain this amazing world. Move over Morgan Freeman.

First off your a psychic how did you know I was going to say the bit was dull

Why is your stainless so stained? 😬

"If you're built anything like me, your arms will be attached at your shoulders" 🤣🤣🤣

You sound like Green Beetle.... Or is it the other way around...

Uh oh, did you check with Warner Bros before including those Happy Feet? :P

Hi, you mention a few times that your lathe cuts a bit of a taper, is there any way to fix it? And if so can you make a video?

Add even more to that, note this: Take a 36 tpi tap, set the lathe to 36 tpi speed - and you get a single thread... set the lathe e.g. at 9 tpi and cut with the 36 tpi tap - and you get a 4 start thread.

a machine from the lathe 70s

Which bathroom does it use?

just dawned on me why they took my license! just got you a sub

4:11 Subscribulator !

Why not modify your SHOES ?! lol

“China Hubub” times were simpler back then.

The alleged c-clamp correspondingly suck because cyclone regrettably unite pro a coordinated foot. mature, sweet nut

More than a 2 hours class lecture, this is so cool. Cleary explained with practical experience.

The miscreant ptarmigan cytochemically employ because wasp neuroanatomically name at a discreet humidity. overrated, cloistered jury

Pretty close to the end, an ad popped up for some company that rolls threads. Rolled threads are so much stronger than cut threads, but the cost of the machinery must be astronomical. Not affordable for a hobbyist, that's for sure. But I started thinking that there is no way to roll internal threads... or is there? Has anyone heard of, or seen such a thing?

How big metal that hold in the jaw ??

"And that is still hot"... I don't know why but that made me laugh out loud :)

irpost.info/face/fy-lm-h-y/m47H2KjDmo2wa6E.html

I like these dirt bike videos

If this is a hobby, whaddya do for a living T? I have a feeling I'm gonna end up like you in a few years: with a garage full of these expensive toys.

NO TONY IM NOT STAYING SAFE. I’M JUST FINE OUTSIDE.

how was the first lathe made without a lathe?

Now all I need is a lathe.

outstanding!

I caught the AVE reference there.

Great video. Well thought out and informative. I enjoyed it and I'll be looking to build one of these. Thanks for sharing.

And now he got a maho

irpost.info/face/fy-lm-h-y/2p-pscPEz47Up6E.html

irpost.info/face/fy-lm-h-y/2p-pscPEz47Up6E.html

irpost.info/face/fy-lm-h-y/2p-pscPEz47Up6E.html

Hi Tony, I recently found your channel and have gone back in time and watched every video you have made so far. I hope to watch the ones that you have already made in the future some day! Not all of us can move as freely through time as you can. Really love your sense of humor and amazing skill set. I recently acquired my second lathe and my first knee mill and have been going crazy buying tooling and trying to get it all up and running. I would love to send you some photos of my setup sometime.

this is great. I love the editing. suscribed!

Your wife let you keep a mini lathe in the living? No wonder you HAD to marry her.

Darnit I almost fell back when he coughed the same time I coughed as well lol.

I had issues with my car, it ran funny the engine ran really uneven, so i called up my friend who has a Car repair shop, he told me to limp the car over there and he started to check the engine, after a like 20 minutes or so and he said he wants to check the spark plugs and started to pull them off, and when he got them out he was shocked in what kinda condition they where, rusted nasty and the spark tip was round no sharp edge anywhere it was worn to a ball he told me he had never seen anything like this in his 30ys on the job

happy 2021 Ole Bean

Full of square information as always, your videos are great with a little comedy. Thanks Tony!

i cringed at the end there.... that was brutal!

Tony: you can't make this stuff up. The guy who put threads on the inside and outside:

Hahaha loved it!

Fun and interesting as per usual... Thanks Man.... :o) . O,,,

"Tools to Cutting Internal Threads on the Lathe"

How many people paused the video at 7:20 to see if they could find a 1" 24TPI tap on Amazon?

Funny as hell! Not that hell is funny, but laughed so hard I think my old school teacher, in hell, heard me laugh.

Thumbnail made think this was Futurama.

Love the 3 axis MPG. almost certainly going to make one for myself.

Your freaking cut-away visuals are the best freaking part of these videos. The subtlety and humor is fantastic.

Well if my lathe breaks down I know who to call. Lemme know if you have a transmission go out in your truck.

dimensions in mm?

"Under a certain size" Me a 2 meter tall dutchman: bamboozled Thanks you clarified after tho

What is the blueing that you use?

you said in your privious video, you would show how to make a cutter. that would be very interesting to me. thanks in advance

This is a great video.

To cut a acme thread drill a hole in a suitable boring bar a drill and tap end use a round piece of tool steel like a broken centre drill grind your thread form you can set front clearance by turning the tool bit slightly!

Awesome video! Very instructive and ludic. I just can't help but wonder, for scholastic and academic purposes, who is the rack? She is extremely beautiful!

2:51 Footage of Tony actually cutting something? I didn't think you owned a saw at this point.

The best ! Tony will have people imitating his video’ soon, or trying to. 😂😂

Use petrol and fire It will do make good joint

Hahahahahahahahahahahaahahahaaahahahaahahahahahaahhahahahahaha

Ha! Latest Mattias Wandell live stream he wished you would show your face more. 😊. Sounds like comedy gold

I didn't realize Ray Romano was into machining.

Electro-chemical cleaning of stainless is a nice option for cleaning stainless welds, also works great for removing rust.

Ugh ugh! Uhh!!

19:05 Stop! Was that bloody Crysis reference!?

Hydrolic pants remover 🤣😂

You are good real good thanks

Going to my lathe now to try this - thank you